29
AA800EZe rev.04
AA800EZe
Memory Card Troubles10.2. Phone Communication Troubles10.3.
APPENDIX11.
Wire Length11.1.
Wire
Type
Tempera-
ture Probe
Other Probe Siren /
12VDC Output
#16 AWG 250 m
(820')
2000 m (6560') 50 m (164')
#18 AWG 125 m
(410')
1300 m (4265') 30 m (98')
#20 AWG 62 m
(205')
800 m (2624') N.A.
#22 AWG 31 m
(102')
500 m (1640') N.A
11.2. Backup Battery Life Span
Current (mA) 25°C / 77°F
Siren and 12VCD
output not used
6 hours
Siren - 1000mA
12VDC - 500mA
1/2 hour
#22 AWG 31 m (102')
Problem Cause Solution
Memory
card error
messages
No SD
card (-1)
There is no memory
card in the connec-
tor.
Insert a memory card in the
Agri-Alert connector.
The memory card is
not compatible.
Make sure the card is com-
patible (see chapter 8).
The memory card is
defective.
Change the memory card.
Invalid
CRC (-2)
The file on the
memory card is
invalid or contains
an error.
Try saving the file on the
card once again. If the file
comes from a PC, wait a
couple of seconds at the end
of the transfer before remov-
ing the card.
Incompat-
ible data
version
(-3)
The file you are
trying to upload is
not compatible with
your controller's
software.
A complete update is re-
quired. Select the "Update
Program and Settings" option
in the transfer menu.
Cannot
open file
(-4)
The card has bad
sectors.
Change the memory card.
Invalid file
(-5)
The file is incompat-
ible or corrupted.
Save the file on the card
once again.
Change the memory card.
Cannot
read file
(-6)
The card has bad
sectors.
Save the file on the card
once again.
Change the memory card.
SD card
is write
protected
(-7)"
The protection
switch of the mem-
ory card is in the
"Locked" position.
Set the protection switch in
the "Unlocked" position.
File already
exists (-8)
The memory card
contains more than
64 AA800.pkg files.
Erase all unused AA800.pkg
files.
Cannot
write to
file (-9)
The card has bad
sectors.
Change the memory card.
There is no AA800.
pkg file on the memory
card.
There is no memory
card in the connec-
tor.
Insert a memory card in the
Agri-Alert connector.
The memory card is
not compatible.
Make sure the card is com-
patible (see chapter 8).
The file is not
located in the root
folder.
Put back the AA800.pkg file
in the root folder.
The system froze during
a backup (fatal error).
The memory card
was removed before
the end of the
transfer.
1. Make sure the memory
card is properly inserted in
the connector.
2. Unplug the wall transform-
er and the battery and then
replug them. The Agri-Alert
will reboot.
3. Try uploading the file once
again.
If the problem persists, con-
tact your dealer.
Problem Cause Solution
I cannot change the
relay status on the
phone.
The relay is
assigned to a
zone
When a relay is assigned to a zone, it
is not possible to change its status on
the phone (the relay status is related
to the zone status).
I cannot stop the
on-site listening on
the phone.
This is normal The On-Site listening automatically
ends after a user-defined delay (On-
Site Listening delay); it cannot end
sooner.
The system cannot
recognize
my password or
selection over the
phone.
Phone
compatibility
If the Agri-Alert does not recognize
your selection, try typing your choice
slower (leave about 1/2 seconds
between each key).
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji